If sheet paper is jammed at the paper exit

RCAUTION:

RThe fusing unit can be very hot. Do not touch any parts under the fusing cover. If necessary, wait until the fusing unit has cooled down.

Notes

If the paper or original gets stuck in the copier, remove both the original and paper.

1Squeeze the locks on each side of the copier and lift the moddle unit between the Original

Table and the Bypass Table.

2Open the fusing unit cover.

3Slowly pull the paper out. If there are scraps left inside, open the inner cover, wait for the copier to cool, and remove the scraps.

SM065

SM048

SM049

52

Page 137
Image 137
Ricoh A251 manual If sheet paper is jammed at the paper exit, Table and the Bypass Table Open the fusing unit cover