Adjusting the Fusing Temperature Manually
1Press the Copy Media key to turn on the “Vellum” or “Film” indicator that you want.
2Hold down the Copy Media key for at least 3 seconds.
The “Lighter Copy” display will show the current fusing temperature. The unlit indicator shows the current temperature.
3Press the Lighter key to decrease the tempera- ture, and press the Darker key to increase the temperature.
The number of temperature levels available
depends on the paper type:
Plain paper | : | 1234567 |
Vellum | : | 1234 |
Film | : | 1234 |
Energy |
| Set | Clear Modes/ |
| Energy Saver | ||
Saver |
| Original |
|
| Set | RF |
|
| Paper | Select | Program |
|
| Wait | |
|
|
| |
Vellum | Lighter Copy |
| |
|
|
| |
Film |
|
|
|
Copy Media Lighter | Darker | Clear/Stop | |
Emergency Stop
4After you have finished the setting, press the Copy Media key.
5 Choose any copy settings you require, then start copying.
Notes
❐The new fusing temperature for the selected paper type is cleared when you press the Clear Modes key or turn off the main switch.
28
