Ricoh A251 Set Paper and RF, Select indicators, Tion is shown by the indicators, Trailing Edge

9.	Set Paper and RF	The Set Paper indicator on the left lights when you select Bypass.
	Select indicators	The RF Select indicator on the right lights when you select Roll
		Paper.
10.	Clear Modes/Energy	Cancels all current settings. When you hold down
	Saver key	this key for three seconds or more, the copier enters
		Energy Saver mode allowing you to conserve power.
		To exit Energy Saver mode, press this key again.
11.	Program key	Allows you to recall or set a program.
12.	Function Select key	Press to change which setting you are editing. The current selec-
		tion is shown by the indicators
		above: Paper Length
		Leading Edge
		Trailing Edge
		Copy Counter
		Also use this key to copy a selected portion of an original.
13.	Plus and minus key	Press to increase the setting being edited.
		Press to decrease the value being edited.
14.	Leading Edge/Trailing	Displays the margin settings and the number of copies
	Edge/Copy Counter	made.
	indicator
15.	Bypass Select/Roll	Selects the paper feed type (when the Roll Feeder
	Paper Cut key	option is installed). Also press to stop a copy job.
16.	Copy Media key	Press to select the type of copy paper you are using.
		The copier will apply more or less heat accordingly.
17.	Emergency Stop	Press to stop the copying process immediately.
	key	Use if your original is getting stuck in the copier.
		If you stop the operation by pressing this key, remove both the
		original and paper.
18.	Density indicator	Shows the density level the copies will have.
	Density keys	Press the left key to make copies lighter.
		Press the right key to make copies darker.
19.	Clear/Stop key	While entering numbers, press to cancel a number to have entered.
		While copying, press to stop copying.
		After copying has finished, press this key, then remove the origi-
		nal.

7