Ricoh A251 manual Whereto Putyour Copier, Machine Environment

WHERETO PUTYOUR COPIER

Your copier needs to be installed by a qualified technician. If you need to transport your copier to a distant location, call your service center before the move.

You can of course move your copier around your office without calling the service center. If you do, remember that the temperature, humidity, and cleanliness of the area around the copier may affect its performance. Choose the new location with care and follow the guidelines below.

Machine Environment

Your machine’s location should be carefully chosen because environment conditions greatly affect its performance.

Optimal environmental conditions

RCAUTION:

m	•	Keep the machine away from humidity and dust. A fire or an electric
		shock might occur.
	•	Do not place the machine on an unstable or tilted surface. If it topples
	over, it could cause injury.

RCAUTION:

o• If you use the machine in a confined space, make sure there is a continuous air turnover.

❐Temperature: 50° to 86F (15° to 30°C)

❐Humidity: 50 to 80% RH

❐To avoid possible ozone build-up make sure to install this copier in a large well ventilated room ensuring an air turnover of at least 1000 ft3/hour/person (30 m3).

❐Set your copier on a strong and level base. The copier must be level within less than a quarter of an inch (5 mm) left to right and less than half an inch (10 mm) front to rear.

62