52

Operating Instructions Administrator Reference
3. Windows NT 4.0 Print Server Configuration
To use a printer connected to the Ethernet interface, select "Smar tNetMonit or" or "LPR Por t" whe n in-
stalling the printer driver.
•SmartNetMonitor
See p.52 “Configuring the Protocols” and p.56 “Installing Software” and p.57 “Installing the PCL
5c or RPCS Printer Driver” or p.62 “Installing the PostScript Printer Driver”.
•LPR Port
See p.52 “Configuring the Protocols” and p.57 “Installing the PCL 5c or RPCS Printer Driver” or
p.62 “Installing the PostScript Printer Driver”.
Note
❒If you want to use “LPR Port", "Microsoft TCP/ IP Printing" must be insta lled.
Configuring the Protocols
Configuring TCP/IP and IPP for Printing
Follow these instructions to configure the Network Interface Board and Windows NT to us e the TCP/IP
protocol and IPP.

Configuring the printer

Configure the printer to use the TCP/IP protocol.
•Confirm that the TCP/IP protocol is set to be active. (The factory default is active.)
•Assign an IP address and make other settings required for using the TCP/IP protocol.