Ricoh CL3000, CL3000e - page 500

Operating Instructions Client Reference
57
Printing without Using a Print Server
Preparation
To use a printer connected to the Ethernet interface or IEEE 802.11b (Wireless LAN) interface, se-
lect "SmartNetMonitor", "Standard TCP/IP Port", "LPR Port" when installing the printer driver.
•SmartNetMonitor See p.57 “Configuring the Protocols” and p.60 “Installing Software” and p.61
“Installing the PCL 5c or RPCS Printer Driver” or p.66 “Installing the PostScript Printer Driver ”.
•Standard TCP/IP Port, LPR Port See p.57 “Configuring the Protocols” and p.61 “Installing the
PCL 5c or RPCS Printer Driver” or p.66 “Installing the PostScript Printer Driv er”.
Note
❒If you want to use “LPR Port”, “Print Services for UNIX” must be installed.
Configuring the Protocols
Configuring TCP/IP and IPP for Printing
Follow these instructions to configure the printer and Windows 2000 to use the TCP/IP protocol and
IPP.
❖
❖❖
❖Configuring the printer
Configure the printer to use the TCP/IP protocol.
•Confirm that the TCP/IP protocol is set to be active. (The factory default is active.)
•Assign an IP address and make other settings required for using the TCP/IP protocol.