Operating Instructions Administrator Reference
184
D
DD
DExit telnet.

msh> logout

When the configuration is changed, a confirmation message requests whether or not the changes
should be saved.
E
EE
EType "yes" to save the changes, and then press {
{{
{Enter}
}}
}.
If you do not want to save the changes, type "no", and then press {
{{
{Enter}
}}
}. If you want to make ad-
ditional changes, type "return" at the command line, and then press {
{{
{Enter}
}}
}.
Note
❒If the "Can not write NVRAM information" message appears, the changes are not saved. Repeat
the steps above.
❒The Network Interface Board is reset automatically when the settings are c hanged.
❒When the Network Interface Board is reset, the active print job which ha s alr eady been sent to
the printer will finish printing. However, jobs that have not been sent ye t will be canceled.

Commands List

This is a list of commands that can be used via remote maintenance.
Note
❒Type "help" to see a list of commands that can be used.

msh> help

❒Type "help command_name" to display information about the syntax o f that command.

msh> help command_name