
Operating Instructions Administrator Reference
204
❖
❖❖
❖Reference
msh> sntp
❖
❖❖
❖NTP Server Address Configuration
You can specify the IP address of the NTP server.
msh> sntp server IP_address
❖
❖❖
❖Interval Configuration
You can specify the interval at which the p rinter synchronizes with the operator-s pecified NTP serv-
er.
msh> sntp interval polling_time
Note
❒The factory default setting is 3600 seconds.
❒You can set the interval from 16 to 16384 seconds.
❒If you set 0, the printer synchronizes with the NTP server only when you turn the printer on. After
that, the printer does not synchronize with the NTP server.
❖
❖❖
❖Time-zone Configuration
You can specify the time difference between the printer clock and the NTP server clock.
msh> sntp timezone +/-hour_time
Example: To set the time-zone difference to +8 hours:
msh> sntp timezone +08:00
Note
❒The time is in 24-hour notation.