Operating Instructions Administrator Reference
188
Note
❒The access range restricts the workstations from which printing is possible by me ans of an a d-
dress. If you do not need to restrict printing, make the setting “0.0.0.0”.
❒The entry is invalid if the start address is greater than the end add ress.
❒Up to five access ranges can be specified. The entry is invali d if the target number is omitted.
❒When using a Web browser, telnet or SmartNetMonitor for Client/Admin, you c an use an IP ad-
dress that has not been restricted by access control.
❖
❖❖
❖Access Control Initialization
msh> access flush
Note
❒This restores the factory-default settings so that all access ranges bec ome "0.0.0.0".
DHCP
Use the set command to configure the boot method.
msh> set parameter {on|off}
"on" means active and "off" means inactive.
Note
❒The default is "on".
❒When you use DHCP, the server also needs to be configured.
❒DHCP takes precedence over all other settings.
Parameter Meaning
dhcp DHCP (Dynamic Host Configuration Pro -
tocol)