Operating Instructions Administrator Reference
60
CAs necessary, type the names to distinguish the printer in [IPP Port Name]. Type a different
name from those of any existing port name.
If you omit this, the address typed in [Printer URL] will be set as the IPP port name.
DIf a proxy server and IPP user name are used, click [Detailed Settings] and configure the
necessary settings.
Note
❒For more information about these settings, see SmartNetMonitor for Clien t Help.
EClick [OK].
LPR Port
AClick [Add].
BSelect [LPR Port], and then click [OK].
CType the printer's IP address in the "Name or address of server providing lpd" box.
DType "lp" in the "Name of printer or print queue on that server" box, and then click [OK].
J
JJ
JMake sure the location for the selected pr inter is shown after [Port:].
K
KK
KDouble-click [Shared] to display the shared settings.
L
LL
LTo share the printer, check the left side of the [Shared] box.
M
MM
MClick the box under [Shared name] to install the alternative driver for the necessary system.
Note
❒Check [Shared] to start installation of an alternative driver ([Windows NT 4.0/2000], [Windows 95/98])
has already been selected.
❒You can add an alternative driver after installation. See p.70 “Setting the Printer Shared”.