Operating Instructions Administrator Reference
55
Configuring a Windows NT computer
Install the NetBEUI protocol on the Windows NT computer, and change the LAN adapter number (La-
na Number).
A
AA
AOpen [Control Panel] and double-click the [Network] icon. Confirm that "NetBEUI Protocol " is
listed in the [Network Protocols] box under the [Protocols] tab.
Note
❒If the NetBEUI protocol is not installed, click [Add...] under the [Protoc ols] tab, and install it. For
more information about installing the NetBEUI protocol, see Windows NT H elp.
B
BB
BChange the Lana Number. Click the [Services] tab, click "NetBIOS Interface" in the [Network
Services:] box , and then click [Properties:].
C
CC
CClick the Lana Number corresponding the Nbf protocol of the [Network Route] headline, and
then click [Edit].
D
DD
DType "0" as the Lana Number.
Note
❒If another protocol’s Lana Number is configured at “0”, change it to another number other than
“0”.
E
EE
EClick [OK].
F
FF
FClick [Close], and then close the [Network] dialog box.
G
GG
GAfter confirming the message to restart, click [Yes].
Note
❒After you change the Lana Number, you must restart the computer.