Operating Instructions Administrator Reference
205
Changing the Password
Use the passwd command to change the rem o te maintenance password.
Important
❒Be sure not to forget or lose the password.
Note
❒The default factory password is "password".
A
AA
AType "passwd".
msh> passwd
B
BB
BType the current password.
Old password:
C
CC
CType the new password.
New password:
Note
❒The password must consist of 3 to 8 alphanumeric characters and symbols. Upper and lower
case characters are considered unique. For example, R is different fr om r.
❒The password is the same as that used in the configuration of the Network Interface Board using
a Web browse and that used in the NIB Setup Tool. If you change a password from telnet, other
passwords are also changed.
D
DD
DType the new password once again.
Retype new password: