
Operating Instructions Client Reference
161
When using the PostScript 3 printer driver
Follow these steps to set up for the PostScri pt 3 printer driver.
AClick the [PostScript] tab.
BClick [Advanced].
CClick to clear the [Send CTRL+D before job] and [Send CTRL+D after job] check boxes.
LLLLClick [OK] to close the Printer Properties.
-
--
-If a message is displayed during installation of the printer driver
When there is a driver in the computer that is newer than the one currently being installed, a message
dialog box appears.
In such a case, you cannot install with the Auto Run program. Use the driver that was used in installing
the driver that is displayed in the message, an d reinstall with [Add Printer].
AClick [Start], point to [Settings], and then click [Printers].
BDouble-click the [Add Printer] icon.
CFollow the wizard to install the driver.
If the printer driver disk is a CD-ROM, the sources of installati on are as foll ows. If the inst aller start s
up, click [Cancel] to quit it.
•PCL 5c
DRIVERS\PCL5C\WIN9X_ME\(Language)\DISK1
•RPCS
DRIVERS\RPCS\WIN9X_ME\(Language)\DISK1
•PostScript 3