Ricoh DDP 92, DDP 70e manual Special Media, Preprinted Paper

Special Media

The printer can use special media that has been designed and treated for xerographic use.

Preprinter paper

Prepunched paper

Index paper

Adhesive labels

Perforated paper

nTab paper

Transparencies

It is recommended that a small sample (500 to 1000 sheets) of the special paper be tested before production quantities are purchased. Testing small samples can give a fairly good indication of what to expect in terms of print quality and toner adhesion; however, only long term tests involving several thousand sheets can begin to provide reliable data about characteristics like environmental changes, paper path reliability, paper dust contamination, loose filler, etc. It is recommended that initial orders of special supplies be limited to a 30-60 day supply until it has have proven to perform well over a long period of time.

Preprinted Paper

It is very important to work closely with the paper supplier when designing and ordering preprinted paper. To avoid problems with preprinted forms, observe the following guidelines:

Forms must be printed with heat-resistant ink that will not melt, vaporize, delaminate, or release hazardous emissions when subject to heat. Refer to “Paper

nFusing” on page C-5for additional information.

Minimize the amount of ink used in printing. Avoid print designs that use large quantities of ink. Perform screen printing if a large area needs to be printed.

C-8 Paper Specifications