Replacing the Toner Collector Bottle
When the OCP displays the message Toner Bottle Full, replace the Toner Collector Bottle with a new empty bottle.
1.Open the Toner Collector Bottle Cover and the Inner Cover. (The Toner Cover Door is located at the right side of the printer next to the MBT.)
2.Remove the old Toner Collector Bottle.
Toner Collector
Bottle Cover
Empty Toner Bottle
Inner Cover
InstallRemove
3.Remove the cap from the side of the Toner Collection Bottle and place it on top of the bottle to seal it.
Cap
4.Install a new Toner Collector Bottle. (See illustration for Step 2.)
5.Close the Inner Cover and the Toner Collector Bottle Cover.
