Ricoh DDP 92, DDP 70e manual When Installing and Relocating the Printer

When Installing and Relocating the Printer

Power Specifications

Printer	Rated	Rated	Rated Current
Model	Voltage	Frequency
70 ppm	200-240V	50/60 Hz	10A
92 ppm	200-240	50/60	12A

Power Cords

WARNING!

Connect the power plug only to a properly rated power outlet. Otherwise, a fire or shock hazard may result.

Never use multi-plug adaptors to plug multiple power plugs into the same power source. Be sure to operate the printer on a sole-use receptacle. Multiple connectors can cause overheating and a fire could result.

Ensure that the plug connection is free of dust. In a damp environment, a contaminated connector can draw a non-negligible amount of current that can generate heat and eventually cause a fire over an extended period of time.

To prevent the risk of electric shocks and personal injury, fire, and printer damage:

■Always use the power cord provided with your printer. When an extension power cord is required, always use a properly rated cord.

If the power cord is not provided, use the following types of power cords:

❒For North America:

3 wires, Type SJT 3x16 AWG (3x1.33 mm2) or thicker Rated min. 250V/10A (with grounding plug, NEMA 6-15P).

❒For Europe

3 wires, min. 3x1.5 mm2

Harmonized (<HAR>), Rated min. 250V/10A (with grounding plug).

WARNING!

The printer must be connected to the grounding power outlet for safe and proper operation.

Apparatet må kun tilkoples jordet stikkontakt.

Apparaten skall ansulatas till jordat uttag när den ansluts till ett nätverk.

Für einen sicheren und ordnungsgemäßen Betrieb muß der Drucker an eine geerdete Steckdose angeschlossen werden.

■Do not attempt to rework, pull, bend, chafe, or otherwise damage the power cord. Do not place a heavy object on the cord.

■Never touch a power cord with wet hands.

337922-002 Safety Information 7