Adhesive Label Configuration

The illustration on the left shows label stock with space between the individual labels. This can cause paper jams and/or labels to peel off during the printing process. The illustration on the right shows the recommended label stock without spaces between the individual labels. Refer to “Adhesive Label Specifications” on page C-13when purchasing label stock.

Label

Label

 

Label

Backing

Sheet

sheet

sheSheet

 

NotNotRecommended

Backing Backing

Sheet sheet

Recommended

Storing Labels

Store the labels in a clean, dry location where the temperature can be maintained at 18° to 24°C (64° to 70°F) and the relative humidity does not exceed 55%.

Allow the labels to adjust to the printer room environment before opening the label carton or package. Move the labels into the printer room at least 24 hours prior to opening the carton or package.

Leave the labels in the original package until printing is ready to begin. Replace the unused labels in the original package and then reseal the package with tape or store the unused labels in a plastic bag.

Do not leave labels in the hopper of an inactive printer overnight or for long

nperiods of time.

Use the labels on a first-in, first-out basis.

C-12 Paper Specifications

Page 136
Image 136
Ricoh DDP 92, DDP 70e manual Adhesive Label Configuration, Storing Labels