Ricoh DDP 92, DDP 70e manual Lifting Tray Name

Message		Description	Corrective Action
Invalid Combination #2		Incorrect stacker choice requested:
		(Cannot deliver to Container Stacker	Cancel the job.
Cancel Job
		from Inserter.)
Invalid Folder #xx		The Booklet Finisher cannot perform	Remove the remaining paper and
Clear Paper Path		the operation.	cancel the job.
Invalid Folder #xx		The Booklet Finisher cannot perform	Cancel the job.
Cancel Job		the operation.
Invalid Password		A valid password is required to access	Retry password. If incorrect, contact
		this area of the OCP.	your System Administrator.
Invalid Time Server Address		Incorrect value in time server IP	Check the time server IP address via
		address field.	the Web Utilities.
Invalid Value		Incorrect value entered.	Re-enter value.
LED Eraser Not Set		The LED eraser is not set.	Contact your authorized Service
Set Erase Lamp	E080		Technician.
Lifting Tray Name		The specified tray is moving into the	Status message. Wait for the printer to
		feed position.	return to a Ready state.
Loading Fail Network		Status message.	Wait for the printer to return to a Ready
			state.
Loading Network		Status message.	Wait for the printer to return to a Ready
			state.
Low on Front Staples		Status message.	Have replacement staples available.
Low on Rear Staples		Status message.	Have replacement staples available.
Low Toner - Recovery		In process of supplying the toner.	Wait for the printer to return to a Ready
	E09A		state.
MBT		The wrong paper size is loaded in the	Load the MBT with the requested
Load xx	E090	multi-bypass tray.	paper size.
Network Load Failed		Network connection error.	Check the Ethernet cable of the NIC.
Open Stacker Full		The output tray is full.	Remove the paper from the tray.
Out of Front Staples		The front stapler unit of the Advanced	Replace the front staple cartridge.
Load Staples		Finisher is out of staples.
Out of PF Front Staples		The front stapler unit of the Publishing	Replace the front staple cartridge.
Load Staples		Finisher is out of staples.
Out of PF Rear Staples		The rear stapler unit of the Publishing	Replace the rear staple cartridge.
Load Staples		Finisher is out of staples.
Out of Rear Staples		The rear stapler unit of the Advanced	Replace the rear staple cartridge.
Load Staples		Finisher is out of staples.
Paper in Connecting Unit		Paper jam in connecting unit of the	Remove the jammed paper.
Remove Paper	E073	Publishing Finisher.
Paper in Duplex Path		Paper jam on return path 1.	Remove the jammed paper.
Remove Paper	E05C
Paper in Fin Holding Path		Paper jam in holding path.	Remove the jammed paper.
Remove Paper
Paper in Fin Sheet Path		Paper jam in sheet path.	Remove the jammed paper.
Remove Paper
Paper in Finisher		Paper jam in entrance path of the	Remove the jammed paper.
Remove Paper	E064	Advanced Finisher.

Troubleshooting 5-7