6.Dispose of the full toner bottle properly.

WARNING!

Waste materials should be disposed of or incinerated under conditions which meet all federal, state and local environmental regulations. Since regulations may vary from one region to another, check with the agency that governs waste disposal in your area for proper procedures.

Replacing the Developer Mix

Replacing the developer mix is a two-phase process. First you exhaust the Developer Mix, and then you supply it.

Exhausting the Developer Mix

1.Take the empty developer bottle out of the box.

2.Open the Front Cover of the printer.

3.Attach the empty developer bottle to the Developer Unit Duct so that the slit of the bottle fits the projection of the duct.

Projection

Slit

Care and Maintenance 4-7

Page 59
Image 59
Ricoh DDP 92, DDP 70e manual Replacing the Developer Mix, Exhausting the Developer Mix