Runco VX-6000D manual Comp, VID 1 / S-VID, HD 1 / HD, Hdmi 1 / Hdmi, Back, Standard, Menu

Controls and Functions

4.POWER ON/OFF

Use these buttons to turn the VX-6000d on or off.

5.ASPECT RATIO

Press this button to go to the aspect ratio menu page (3/7).

6.SOURCE

Press this button to go to the source selection menu page (2/7).

7.MENU

Press this button to go to the DHD Controller OSD menu navigation page (4/7).

8.VIDEO

Press this button to switch to the Composite Video input.

9.COMP.

Press this button to switch to the Component Video input.

10.S-VID 1 / S-VID 2

Press these buttons to switch to the S-Video 1 or S-Video 2 input.

11.HD 1 / HD 2

Press these buttons to switch to the HD/RGB 1 or HD/RGB 2 (RGBHV or YPbPr component) input.

12.HDMI 1 / HDMI 2

Press these buttons to switch to the HDMI 1 or HDMI 2 input.

13.BACK

Press this button to return to the main menu page (1/7).

14.Aspect Ratio Selection Buttons

Use these buttons to select an aspect ratio directly, as follows:

ANAMORPHIC

For viewing 16:9 DVDs or HDTV programs in their native aspect ratio.

4 x 3 (Standard 4:3)

Scales the input signal to fit 4:3 display mode in the center of the screen.

LETTERBOX

For viewing LaserDisc movies or non-anamorphic DVDs on a 16:9 screen.

VIRTUALWIDE

Enlarges a 4:3 image horizontally in a NON-linear fashion to fit 16:9 full screen display.

CINEMA

For viewing 2.35:1 source material.

15.MENU

Press this button to access the OSD controls, or to exit the current menu and return to the previous one.

16 Runco VX-6000d Owner’s Operating Manual