Runco VX-6000D manual VX-6000d Built-In Keypad, Not used

Controls and Functions

2.6

VX-6000d Built-In Keypad

The VX-6000d has a built-in keypad that you can use to access the menu system for working with digital 1080i or 1080p sources. Figure 2-7shows the VX-6000d built-in keypad; the paragraphs that follow describe its use.

RETURN ENTER MENU STBY POWER

1 2 3 4 5 6 7 8

Figure 2-7. VX-6000d Built-In Keypad

1.RETURN

Press RETURN to exit the current menu or cancel an operation.

2.ENTER

Press ENTER to confirm a menu item selection.

3.DOWN / UP / LEFT / RIGHT

Use these buttons to select menu items or adjust settings.

4.MENU

Press MENU to display or hide the OSD menus for digital 1080i or 1080p sources.

5.(not used)

6.(not used)

7.STBY

Press STBY to put the projector into standby mode.

8.POWER

Press POWER to turn the projector on or off.

Only trained service personnel should use the built-in

Note keypad. Almost all projector configuration and operational tasks can be performed using the DHD Controller.

It is only necessary to use the built-in keypad if IR signals from the remote control cannot reach the DHD Controller, or for performing service-related tasks such as resetting the lamp hour counter (refer to Lamp Replacement on page 73).

18 Runco VX-6000d Owner’s Operating Manual