Runco VX-6000D to Automation/ Control System or PC

Installation
36 Runco VX-6000d Owner’s Operating Manual
PRELIMINARY
RS-232 Controller
Connection
Use a standard, 9-pin RS-232 cable to connect a PC or home theater control/automation
system (if present) to the RS-232 Control port on the DHD Controller; see Figure 3-13.
For more information about using this connection, refer to Serial Communications on
page 79.
Figure 3-13. RS-232 Control System Connection
➤
Pb Pr Y
Video
3
IR
RS-232 Control
S-Video 1
S-Video 2
12
TRIGGERS
RS-232 OutComponent Video
1
2
345
7
89 6
to Automation/
Control System
or PC
2 Transmit Data
3 Receive Data
5 Ground
(none of the other pins are used)