Controls and Functions

1.IR OUTPUT INDICATOR

Lights when a button is pressed to indicate that an IR signal is being transmitted.

2.ON / OFF

Press to turn the projector on or off.

3.ENTER

Press to select a highlighted menu item or confirm a changed setting.

4.Cursor Buttons (, , , )

Use these buttons to select items or settings, adjust settings or switch display patterns.

When no menu is present on-screen, the UP and DOWN buttons toggle through the available aspect ratios, in this order:

UP Button = Anamorphic - Standard (4:3) - Letterbox - VirtualWide - Cinema - Virtualwide 2.35

DOWN Button = Virtualwide 2.35 - Cinema - VirtualWide - Letterbox - Standard (4:3) - Anamorphic

Virtualwide 2.35 is available only on the VX-6000d/CineWide and

Note only on the analog inputs (HD/RGB, SD Component, Composite and S-Video). For more information about aspect ratios, refer to Table 4-1.

Likewise, the LEFT and RIGHT buttons toggle through the different source inputs, in this order:

LEFT Button = HDMI 2 - HDMI 1 - HD/RGB2 - HD/RGB 1 - Component SD - S-Video 2 - S-Video 1 - Composite

RIGHT Button = Composite - S-Video 1 - S-Video 2 - Component SD - HD/RGB 1 - HD/RGB 2 - HDMI 1 - HDMI 2

The “direct select” function of the UP, DOWN, LEFT and RIGHT

Note buttons is available only on the analog inputs (HD/RGB, SD

Component, Composite and S-Video).

5.LIGHT

Press to illuminate the buttons.

6.MENU

Press this button to access the OSD controls, or to exit the current menu and return to the previous one.

7.VIDEO (1)

Press to select Composite video input as the source or to enter the numeric character “1.”

8.COMP (Component) (2)

Press to select Component SD (480i/576i) video input as the source or to enter the numeric character “2.”

Runco VX-6000d Owner’s Operating Manual

13

Page 25
Image 25
Runco VX-6000D manual On / OFF, Cursor Buttons, Video, Comp Component