Operation
•Runco/ISF Logo Splash Screen Timers: When you turn on the
Use the up or down cursor button to select a timer value to adjust. Use the right or left cursor button to change the timer value. Press MENU when you have finished configuring both timers.
OSD Position: Select OSD Position, press ENTER and use the arrow buttons to change the size and position of the OSD controls.
Use the Service menu to access advanced projector configuration settings. This menu should be used by
You must enter a passcode to access the Service menu.
Note
Test Video: Select Test Video from the Service Menu to access the internal test patterns on the
Press MENU to exit test pattern mode.
Input Names: You can give each DHD Controller input a descriptive name. For example, you may want to change the default input name to the type of source component connected to it: “VCR,” “DVD,” “Laptop” et cetera. Composite,
To edit an input name, select Input Names from the Service menu. Press 
or 
to select an input and press ENTER. Use the 
or 
buttons to change a character; press 
or 
to select a character to change. When you have finished editing the input name, press MENU.
To restore the default input name, press 
repeatedly to highlight that input name in the “Restore” column. Then, press ENTER.
To save input names so that they can be restored after a System Reset (described on page 64), press 
repeatedly to highlight “Save.” Then, press ENTER.
The 
button takes you from top to bottom in the left column, then
Note from top to bottom in the right column. To highlight “Save,” scroll through both columns.
Service
Service
Test Video
Input Names
Remote Control
Analog Out Mode
Display Device
HD Format
Triggers
Miscellaneous
Resolution
System Reset
Restore Saved Settings
Input Names
| Restore |
Composite | Composite |
|
|
Component SD | Component SD |
HD/RGB 1 | HD/RGB 1 |
HD/RGB 2 | HD/RGB 2 |
HDMI 1 | HDMI 1 |
HDMI 2 | HDMI 2 |
Save |
|
Runco | 61 |
