Installation
Runco VX-6000d Owner’s Operating Manual 21
PRELIMINARY
3.2 Quick Setup

Table 3-1 gives a quick overview of the VX-6000d installation process. The sections

following this one provide detailed instructions.

Installation should be performed by a qualified custom video

installation specialist.

Table 3-1. Installation Overview

Step Procedure For Details, Refer to
page...
1Choose a location for the projector 22
2
If installing an VX-6000d/CineWide or
VX-6000d/CineWide with AutoScope: Install AutoScope
lens motor or fixed CineWide base plate
27
3Mount the projector 30
4Connect the DHD Controller to the projector 30
5Connect signal sources to the DHD Controller 32
6Connect external controller to RS-232 port (optional) 36
7Connect 12-volt trigger outputs to AutoScope lens motor
and/or other equipment (optional)
37
8Connect projector, DHD Controller and lens motor (if
present) to AC power and power up
39
9For rear-screen and/or ceiling-mount installations, select
the proper picture orientation
40
10 Primary Lens adjustments: projected image size (zoom),
position (shift) and focus
24, 40
11 Install CineWide anamorphic lens (optional) 42
12 CineWide lens adjustments: position, pitch (angle),
geometry and focus
44
13
Projector calibration: adjust the following for each input;
save settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Input position
51 through 72
Note