Auto Power On
PC module power
Max. Power Saving
Power on only
You can set the screen standby mode to be applied when an input signal is received.•• Auto
•• OffThe message No Signal will appear if no input signals are detected.
――The Standby Control option is only enabled when Source is set to PC, DVI, HDMI1, HDMI2 or DisplayPort. ――If No Signal is displayed although a source device is connected, check the cable connection.
――If No Signal Message is set to Off,the No Signal message does not appear. If this is the case, set No Signal Message to On.•• On
The power button can be set to either turn on the power or turn on/off the power.•• Power on only: Set the power button to turn on the power.•• Power on and off: Set the power button to turn on/off the power.
Network StandbyThis feature keeps the network power on when the product turns off.
•• Off / On