Table 1-5 (Concealed Duct High-Static Pressure)
Part Name | Figure | Q’ty | Remarks |
Washer |
| 8 | For suspending indoor unit from ceiling |
Nut |
| 8 | For suspending indoor unit from ceiling |
Flare insulator |
| 1 | For gas tube |
| 1 | For liquid tube | |
|
| ||
Drain socket |
| 1 | For drain pipe connection |
Table 1-6 (Ceiling-Mounted)
Part Name | Figure | Q’ty | Remarks |
| 1 | Printed on container box | |
Washer |
| 4 | For temporarily suspending indoor unit from ceiling |
Flare insulator | T1/8" | 2 | For gas and liquid tube joints |
| |||
| 2 | ||
| T3/16" |
| |
|
|
| |
Insulating tape | White | 2 | For gas and liquid tubes flare nuts |
Vinyl clamp |
| 8 | For flare and drain insulators |
Drain hose | 1 | For main unit and PVC pipe joints | |
|
|
| |
Hose band |
| 2 | For drain hose connection |
Drain insulator |
| 1 | For drain hose joint |
Gum eyelet |
| 1 | For power supply inlet |
Table 1-7 (Wall-Mounted)
Part Name | Figure | Q’ty | Remarks |
Tapping screw | 5/32" ⋅ 1" | 10 | For fixing the rear panel |
Plastic cover |
| 1 | For improved tubing appearance |
Insulator |
| 1 | For insulating flare nut (2452 type only) |
10