Sharp AR-M355N 7Touch the [OK] key, 3Touch the [OK] key, 3Touch the [CUSTOM SIZE] key, 4Touch the [STORE/DELETE] key, 6 of the original with the keys

STORING, DELETING, AND USING ORIGINAL SIZES

Up to 9 special original sizes can be stored. Stored sizes can be easily called up and are not erased if the power is turned off. Storing a frequently used original size saves you the trouble of manually setting the size each time you fax that size of document.

●To cancel an original size storing, using, or deleting operation, press the [CA] key or touch the [ORIGINAL] key on the screen.

STORING OR DELETING AN ORIGINAL SIZE
			1
1	Touch the [ORIGINAL] key.	Enter the X (width) and Y (length) dimensions
		6 of the original with the keys.

STANDARD

RESOLUTION

AUTO 81/2 X11

ORIGINAL

2Touch the key under [SCAN SIZE].

SCAN SIZE
AUTO 81/2X11	100%

X					CANCEL			OK	X	(width) is initially
A									selected.
			Y
									Enter X and then touch
	X			17	(2 1/2		17)
					inch				the	( ) key to enter Y.
	Y				(2	1/2	11 5/8)		A width of 2-1/2 to 17
				11
					inch
									inch (64 to 432 mm) can
		RECALL					STORE/DELETE

be entered in X, and a length of 2-1/2 to 11-5/8 inch (64 to 297 mm) can be entered in Y.

7Touch the [OK] key.

The original size entered in step 6 is stored in the key selected in step 5.

2-SIDED 2-S

BOOKLET TAB

3Touch the [CUSTOM SIZE] key.

To exit, touch the [ORIGINAL] key.

8 When you touch a key that shows an original size in step 5, a message screen appears that contains the keys [CANCEL], [DELETE], and [AMEND].

MANUAL 51/2X81/2

CUSTOM 51/2X81/2R

SIZE

STANDARD S

●To cancel the procedure, touch the [CANCEL] key.

●To delete the selected original size, touch the [DELETE] key.

●To change the original size stored in the key, touch the [AMEND] key. The screen of step 6 will appear to let you change the size.

4Touch the [STORE/DELETE] key.

RECALL STORE/DELETE

5 Touch the original size key ( ) that you wish to store or delete.

			To store an original size,
X51/2 Y101/8
			touch a key that does not
			show a size (		).
			Keys that already have an
			original size stored will show
	RECALL
		STORE/DELETE
			the stored size (			).
				X5 1/2 Y101/8

To delete or change a stored size, touch the key that shows the size that you wish to delete or change.

●If you are storing an original size, go to step 6.

●If you are deleting an original size, go to step 8.

●If you are changing an original size, go to step 8 and touch the [AMEND] key.

9To exit, touch the [ORIGINAL] key.

USING A STORED ORIGINAL SIZE

1 Follow steps 1 to 3 of "STORING OR DELETING AN ORIGINAL SIZE".2Touchto use. the original size key that you wish

X51/2 Y101/8

RECALL STORE/DELETE

3Touch the [OK] key.

The stored original size is called up.

1-9