Sharp AR-M355N 2Touch the [RECIPIENT] key, Touch indexes and the keys as needed, 5Touch the [OK] key in the screen of step

PROGRAMMING, EDITING, AND DELETING F-CODE MEMORY BOXES

SETTING FOR F-CODE RELAY BROADCAST MEMORY BOXES (RECIPIENT)

Program the end receiving machines to which document data received in the F-code relay broadcast memory box will be transmitted when your machine is a relay machine.

Up to 30 end receiving machines can be programmed. If you attempt to program more than this number, a message will appear and programming will not be possible.

1 Touch the [RELAY BROADCAST] key in step 3 of "PROGRAMMING AN F-CODE MEMORY BOX" on pages 6-10 to 6-11 and store a box name, sub-address, and passcode.

2Touch the [RECIPIENT] key.

The address selection

BOX NAME	FAX INFORMATION
		screen appears.
SUB ADDRESS	123456/987654

RECIPIENT

3 Touch the one-touch keys you wish to include as end receiving machines.Touch indexes and the keys as needed.

F-CODE MEMORY BOX / RELAY BROADCAST

SELECT ADDRESS.

OK

1/1

DIRECT ENTRY

A

B

ADDRESS REVIEW

C GROUP

CLIFF QUIROGA

DANIEL ERNY

* 2

FREQUENT USE

ABCD

EFGHI

JKLMN

OPQRST

UVWXYZ

ABC

GROUP

●The selected one-touch keys are highlighted and programmed as end receiving machines.

●If you touch an incorrect key, touch the key again to remove the highlighting and delete the destination.

● You can also use the [ ] key (speed dial key) to store a one-touch key. (See "SENDING A FAX BY SPEED DIALING" on page 2-4.)

●To enter a fax number that has not been stored in a one-touch key, to enter a full fax number with the numeric keys, touch the [DIRECT ENTRY] key and then the [FAX] key and enter the fax number.

		OK
FAX
E-MAIL	DIRECT ENTRY
INTERNET-FAX	ADDRESS REVIEW
JKLMN OPQRST UVWXYZ	ABC	GROUP

●Enter the fax number and then a sub-address and transmission settings (if desired) as explained in steps 10 to 13 and 15 of "STORING ONE-TOUCH DIAL KEYS" on pages 6-3 to 6-4, and then touch the [OK] key twice to return to the screen of step 3.

4To check the destinations that have been selected as end receiving machines, touch the [ADDRESS REVIEW] key.

						OK	The		destinations
							selected		as	end
		1/2
							receiving machines are
				DIRECT ENTRY			displayed.
							You	can	delete	a
			ADDRESS REVIEW
	* 0						destination		by touching
OPQRST		UVWXYZ					it.	When		the
				ABC	GROUP

confirmation message appears, touch the [YES] key to delete the destination.

5Touch the [OK] key in the screen of step 3.

You will return to the screen of step 2 and the number of stored as end receiving machines will appear.

6To exit, touch the [EXIT] key. To program another memory box, touch the [NEXT] key.

Touching the [EXIT] key returns you to the screen of step 3 on page 6-10.

Touching the [NEXT] key returns you to the screen 6 for programming a new memory box (the screen of

step 4 on page 6-10).

6-13