Sharp AR-M355N 3Touch the [OK] key, ■Resolution settings, ■ Change the resolution, 1 Touch the [RESOLUTION] key

SELECTING RESOLUTION AND EXPOSURE SETTINGS

After loading an original, you can adjust the resolution and exposure settings to match the condition of the original- for example, if it has small or faint characters, or if it is a photo. After loading the original in fax mode, adjust the settings as explained below.

SELECTING THE RESOLUTION

The initial resolution setting is STANDARD. To change the setting, follow these steps:

■ Change the resolution.1 Touch the [RESOLUTION] key.

STANDARD

■Resolution settings

Touch this key if your original consists Standard of normal-sized characters (like those

RESOLUTION

AUTO 81/2X11

ORIGINAL

2 Touch the [STANDARD] key, [FINE] key, [SUPER FINE] key, or [ULTRA FINE] key.

Fine

in this manual).

Touch this key if your original has small characters or diagrams. The original will be scanned at twice the resolution of the [STANDARD] setting.

Touch this key if your original has

	The selected key is
	highlighted.
STANDARD
	If you touched the [FINE]

Super fine

intricate pictures or diagrams. A higher- quality image will be produced than with the [FINE] setting.

FINE		key, [SUPER FINE] key,
SUPER FINE	HALF TONE	or [ULTRA	FINE] key,
ULTRA FINE		you can	also select
		halftone by touching the
		[HALF TONE] key.

Touch this key if your original has intricate pictures or diagrams. This Ultra fine setting gives the best image quality. However, transmission will take longer

than with the other settings.

3Touch the [OK] key.

OK

DARD

NE

FINE HALF TONE

FINE

You will return to the initial screen.

Half tone

Touch this key if your original is a photograph or has gradations of color (such as a color original). This setting will produce a clearer image than [FINE], [SUPER FINE], or [ULTRA FINE] used alone. Half tone cannot be selected if [STANDARD] has been selected.

NOTES

●The factory default setting for the initial resolution is [STANDARD]. The initial resolution can be changed to a different setting in the key operator programs (see "Initial resolution setting" on page 8-4).

●When using the automatic document feeder, the resolution setting cannot be changed once scanning has begun.

●When a fax is sent at [ULTRA FINE], [SUPER FINE], or [FINE] resolution, a lower resolution will be used if the receiving machine does not have that resolution.

1-10