Sharp AR-M355N one-touch, one-touch, 13Touch the [OK] key, key, touch the [EXIT] key, key, touch the [NEXT] key, key, and then check the key, If you wish to program another

NEXT

INTERNET-FAX

USER 3

MODE

KEY NAME

E-MAIL

MODE

KEY NAME

E-MAIL

Transmission speed

Speed selections are 33.6 kbps, 14.4 kbps, 9.6 kbps, and 4.8 kbps. The higher the number, the faster the transmission speed.

NOTE

Set the transmission speed only when you know what speed is most suitable, such as when you are sending a fax to a foreign country and telephone line conditions are bad. If you do not know the line condition, do not change this setting.

International correspondence mode

Selections are NONE, MODE 1, MODE 2, and MODE 3.

NOTES

● When sending a fax to a foreign country, telephone line conditions can sometimes distort the fax or interrupt the transmission. Selecting the right international correspondence mode can help alleviate these problems.

● If errors frequently occur when sending a fax to a foreign country, try each of modes 1 to 3 and select the mode that enables the best transmission.

16When you have finished programming the one-touch key, touch the [EXIT] key.

If you wish to program another one-touch key, touch the [NEXT] key.

33.6 kbps/NONE

SHARP CORPORATIO

No.048 REGISTRATION IS COMPLETED

DIRECT ADDRESS / INDIVIDUAL

The initial transmission settings are "TRANSMISSION SPEED: 33.6 kbps" and "INTERNATIONAL CORRESPONDENCE MODE: NONE". To change either of the settings, touch the [MODE] key.

If you do not wish to change the settings, this step is not necessary.

After touching the [MODE] key, you can change either of the two settings. When finished, touch the [OK] key.

15Check the transmission settings.

33.6kbps/NONE

SHARP CORPORATIO

No.048 REGISTRATION IS COMPLETED

DIRECT ADDRESS / INDIVIDUAL

The characters appearing next to the [NAME] key will be displayed in the key. Only the first 9 characters of the name entered in step 1 will be displayed.

If you need to change the name that will be displayed in the key, touch the [KEY NAME] key.

If you do not wish to change the name, this step is not necessary.

Refer to chapter 7 of the "Operation Manual (for general information and copier operation) for the procedure for entering

characters.

key, and then check the key

14Touchname. the

FAX

FAX

STORING, EDITING, AND DELETING AUTO DIAL KEYS AND PROGRAMS

10Use the numeric keys to enter the fax number.

DIRECT ADDRESS / INDIVIDUAL			NEXT		EXIT
No.048
FAX No.		CANCEL				OK
ENTER OWN FAX NO. VIA THE 10 KEY-PAD,THEN PRESS [OK].
				PAUSE
	0666211221
			SUB ADDRESS

●To insert a pause between digits of the number, touch the [PAUSE] key. The pause appears as a hyphen "- ". Refer to page 8-6 to set the duration of the pause.

●If you make a mistake, press the [C] key to clear one digit at a time, and then enter the correct digit(s).

●If you are not going to enter a sub-address and password after the fax number, proceed to step 13.

NOTES

●For information on sub-addresses and passcodes, see "MEMORY BOXES AND SUB-ADDRESSES/

PASSCODES REQUIRED FOR F-CODE TRANSMISSION" on page 4-2.

●A maximum of 64 digits can be entered, including the fax number, sub-address, passcode, any pauses (hyphens), and slashes "/" (to separate the sub-address and passcode).

11If you need to enter a sub-address, touch the [SUB ADDRESS] key and then enter the sub-address with the numeric keys.

CANCEL OK

PRESS [OK].

PAUSE

SUB ADDRESS

When you touch the [SUB ADDRESS] key, a slash is entered after the fax number. Continue by entering the sub- address (max. 20 digits).

If you do not wish to enter a passcode, proceed to step 13.

12If you wish to enter a passcode, touch the [SUB ADDRESS] key once again and enter the passcode with the numeric keys.

DDRESS / PASS CODE VIA THE 10-KEY PAD

0666211221/3456/

When you touch the [SUB ADDRESS] key, a slash is entered after the sub-address. Continue by entering the passcode (max. 20 digits).

13Touch the [OK] key.

You will return to the one-touch key programming screen and "REGISTRATION IS COMPLETED." will appear in the touch panel.

The number (Speed Dial number) that appears next to [No.] is used for Speed Dialing. This number is useful when you frequently send faxes to the same destination.

NOTE
The "FAX No." line only shows 32 digits, regardless	OX
of how many digits actually programmed.

EXIT

1/2

Pressing the [EXIT] key returns you to the screen of step 4 on page 6-2.

Touching the [NEXT] key returns you to the screen of step 1 on page 6-3.

6-4