Sharp AR-M355N manual Supplies

FINISHER

The finisher can deliver collated sets either stapled or unstapled. Unstapled sets can be offset stacked from the previous set for easy separation of the sets.

Part names

Latch

Release the latch to open the finisher for misfeed removal.

Top cover

Open for misfeed removal.

Staple box

Pull the box out to replace the staple

cartridge or to

remove jammed staples.

Top tray

Printer, copier and fax output can be delivered here.

To print onto large paper (11" x 17", 8-1/2" x 14", 8-1/2" x 13", A3 or B4), extend the tray.

Offset tray

Stapled sets or sets to be offset will be delivered here.

NOTES
		3
● Do not put pressure on the finisher (particularly each tray).
● Do not place anything on the top cover. Doing so will interfere with the machine’s paper handling during duplex
printing.
● The tray moves up and down during operation. Be careful not to impede its movement.
● The finisher requires the installation of other peripheral devices in order to be functional and cannot be installed
together with some other devices. The table on page 8-4 shows the configurations which are compatible.
Specifications
Name	Finisher (AR-FN6)
Number of trays	2
Paper output	Print face down
Tray type	Top tray: normal tray, Lower tray: offset tray
Tray capacity	Top tray: 500 sheets (8-1/2" x 11" or A4 size, 20 lbs. or 80 g/m2)
	Lower tray: 750 sheets (8-1/2" x 11" or A4 size, 20 lbs. or 80 g/m2)
Paper sizes	Top tray: same as the specifications of paper for feeding in the main unit
	Lower tray: Max. 8-1/2" x 11" or A4, Min. B5
Paper weight	Top tray: same as the specifications of paper for feeding in the main unit
	Lower tray: 16 to 34 lbs. or 60 to 128 g/m2
Paper types	Top tray: same as the specifications of paper for feeding in the main unit Lower tray:
	plain paper only
Tray full detection	Provided in both the top tray and the lower tray
Offset function	Provided for the lower tray only. The offset amount is approx. 1 inch (25 mm)
Paper sizes for stapling	8-1/2" x 11", A4, and B5
Stapling capacity	30 sheets* (8-1/2" x 11" or A4 or smaller 20 lbs. or 80 g/m2)
	*Up two sheets of cover stock (34 lbs. or 128 g/m2) can be included.
Staples	Single staple can be placed in the top left or lower left corners or two staples can be
	centered on the left side
Power supply	Supplied from machine
Dimensions	18-1/8" (W) x 20-7/8" (D) x 20" (H) (460 mm (W) x 530 mm (D) x 508 mm (H))
Weight	Approx. 46.3 lbs. (21 kg)

Specifications are subject to change for improvement without notice.

Supplies

AR-SC1 staple cartridges must be used for this finisher. The cartridge package contains three cartridges approx. 3000 staples each.

3-7