Setting the Date and Time
Setting the Date and Time
The date and time appear in the display, in reports, and at the top of each page you transmit. Set the date and time by pressing the keys on the operation panel as shown below.
Note: Make sure the display shows the date and time before beginning a programming operation. If the display shows the telephone line status, press the CHANGEOVER key to switch to the date and time.
1. Installation
1 Press these keys:
The display will show:
4:DATE&TIME SET MODE DATE
FUNCTION
3 4
(Note: the currently set date will appear to the right of “DATE”)
2 Enter a
•To correct a mistake, press the STOP key to move the cursor back to the mistake and then enter the correct number.
01
Example: January
3 | Enter a |
| 0 | 5 |
|
| (“01” to “31”). |
|
| ||
|
|
| Example: the 5th | ||
4 | Enter the year (four digits). | 2 | 0 | 0 | 1 |
|
| ||||
Example: 2001
31
