Programming
Clearing auto-dial numbers
Note: You cannot clear a number if it is used in a program or timer oper- ation, if it is used to specify the relay fax machine in a relay group, or if it is included in a Group Key. First clear the number from the operation or group, then perform the following clearing procedure. To check where the number is used, print out the Program/Group List, the Timer List, and/or the Relay Group List as explained in Chapter 7.
1 Press these keys:
| FUNCTION | 3 | 1 |
The display will show: |
| ||
|
|
| |
1:FAX/TEL. # MODE |
|
|
|
1=SET, 2=CLEAR |
|
|
|
2
Press 2 to select CLEAR.
2
3
To clear a Rapid Key, press the Rapid Key.
To clear a Speed Dial number, press the SPEED DIAL key and then enter the number with the numeric keys. (If you enter less than 2 digits on the FO- 4650, or 3 digits on the
02
B
Example: Rapid Key 02
4 Press the START key.
START
46
