Sending a Fax by Automatic Dialing
2 Enter the number of the receiving |
|
|
|
|
|
|
| |
machine by pressing the numeric | 3 | 1 | 2 | 4 | 4 | 1 | 1 | |
keys. | ||||||||
|
|
|
|
|
|
| ||
• If a pause is required between any |
|
|
|
| (Example) |
| ||
of the digits to access a special service or an outside line, press the REDIAL key (two seconds per pause). The pause will appear as a hyphen. Several pauses can be entered in a row.
3 Check the display. If the number of
the receiving machine shown isSTART correct, press the START key.
•If it is not correct, press the STOP key to backspace and clear one digit at a time, and then
2. Sending Documents
Searching for an auto-dial number
If you don’t remember the Rapid Key or Speed Dial number in which you have programmed a particular fax number, you can search for the number by following the steps below. Once you have found the number, you can dial it and transmit the loaded document by simply pressing the START key.
Note: Only names programmed for
53
