Sharp FO-4650, FO-4970 operation manual If the memory becomes full

Sending a Fax by Automatic Dialing

If the memory becomes full...

If the memory becomes full while a document is being scanned, MEMORY FULL will appear in the display. If Option Setting 23 (Quick On-line) is set to YES, scanning will automatically resume when memory becomes free again as pages are transmitted. (Note: Quick On-Line is initially set to YES at the factory. To change the setting, see Chapter 6, Optional Settings.)

If Quick On-Line is set to NO, MEMORY FULL ERROR will appear in the display. Press the START key or the STOP key as follows:

♦Press the START key if you want to transmit the pages which have been stored up to that point in memory. The remaining pages will be ejected from the feeder. After transmission, the memory will be cleared and you can transmit the remaining pages. You will also need to transmit the page which was being scanned when the mem- ory filled up.

♦Press the STOP key if you want to cancel the entire transmission.

If you do not press the START key or the STOP key within one minute, the transmission will be canceled and the pages already scanned cleared from memory. You will need to retransmit all pages of the document.

2. Sending Documents

49