Sharp FO-4970, FO-4650 operation manual Setting 29 Verification Stamp, Setting 30 Print Hold

Optional Settings

Setting 29: VERIFICATION STAMP

Press 1 if you want the fax machine to stamp each original document page as it is scanned. After scanning, you can check to see if all pages have been stamped to verify that no double feeds occurred. Press 2 to turn the function off.

Note: To use this function, your dealer must install the Verification Stamp option.

♦Initial setting: 2

Setting 30: PRINT HOLD

Press 1 if you want the fax machine to hold received documents in memory instead of immediately printing them out (note that you must first enter a Print Hold passcode as explained in Print Hold in Chapter 5). To turn off the Print Hold function, press 2, enter the 4-digit Print Hold passcode, and then press START.

♦Initial setting: 2

Setting 31: Not used.

Setting 32: COPY RESOLUTION

Use this setting to select the default copying resolution (the resolution used for copying if a setting is not made with the RESOLUTION key). Press 1 (S-FINE) to set the default resolution to SUPER FINE, or 2 to set it to FINE.

♦Initial setting: 2

152