Siemens HIPATH 3000, HiPath 500 Telephone blocking, Handset telephone lock, Entering a new PIN

Telephone blocking

Step by step

©or w

stÐH/Set Settings [

st		[
	Handset
st		[
	Change HSPIN
		o
		o
		s
		o

[

a

Telephone blocking

Handset telephone lock

You can protect your handset against unauthorised ac- cess by entering a 4-digit numerical code to lock it.

The PIN is preset to "0000" (default). The handset does not prompt for a PIN in this setting. As soon as you have changed the PIN you will need to enter it when you turn on the handset.

Enter the value "0000" again to deactivate the PIN.

Attention:

If you have forgotten your PIN, please contact Siemens Service. The PIN will be reset at your own expense.

Entering a new PIN

Open the handset’s main menu.

Select the menu icon and confirm.

Select the menu item and confirm.

Select the menu item and confirm.

Enter the old PIN. If a PIN has not yet been set, then en- ter "0000".

Enter the new PIN.

Move the cursor down one line.

Repeat the new PIN.

Confirm your entries.

Press the On-hook key to end the operation.

Battery charging when PIN lock active

If the handset deactivates because the battery pack is flat, it automatically reactivates as soon as you place it in the charging shell. The charging operation starts. If you have already set a PIN, you must enter it so that the handset can receive calls.

118