Setting the handset

Step by Step

*

*

*

*

Beep on

*

Activating or deactivating the ringer

Deactivating the ringer

Hold down the key until a confirmation tone is emitted.

The ringer is deactivated.

Activating the ringer

Hold down the key until a confirmation tone is emitted.

Deactivating the ringer for the current call

Hold down the key until a confirmation tone is emitted.

Reactivate the ringer after the call so that the handset uses the ringer to signal the next call.

Activating or deactivating the warning tone

When you activate the warning tone, all other tones are deactivated. An incoming call is signalled by this brief tone.

If the handset is in a call pickup group, a pickup call is also signalled by the warning tone.

Activating the warning tone

Hold down the key until a confirmation tone is emitted. Press the Display key within three seconds.

The warning tone is activated. The volume of the warn- ing tone corresponds to the volume of the external ring- er.

Deactivating the warning tone

Hold down the key until a confirmation tone is emitted.

29

Page 37
Image 37
Siemens HiPath 500, HIPATH 3000 operating instructions Activating or deactivating the warning tone