Siemens HIPATH 3000 Sending a signal to the network, Activating call forwarding to a trunk

Conducting calls – enhanced functions

Step by Step

			p
		Menu
><			[
	Service?
><			[
	work?
	*51=Recall to Net-
			o

cor d

		Menu
><			[
	Service?
><			[
	Trunk FWD on?

o[

Sending a signal to the network

To enable ISDN-type services/ features to be started via analog lines (forexample, call waiting when a line is busy, three-way conference calls, etc.), you must send a signal to the network before dialling the service code and/or phone number.

This function can also be called by entering the code (Æ Page 122).

You have an external connection.

Call the system menu.

Select the menu item and confirm.

Select the menu item and confirm.

Enter the service code and/or the phone number.

External call forwarding with a multiple subscriber number

If your communication system is connected to an ISDN multiple device line, then you can forward all incoming calls from the public network through your multiple sub- scriber number (MSN) to an external destination.

There are three types of forwarding:

•Calls are forwarded immediately (1=immediate call forwarding).

•Calls are forwarded after a certain time (2=unan- swered calls).

•Calls are only forwarded when the line is busy (3=when busy).

Activating call forwarding to a "trunk"

Press and hold down the Talk key or press the Speaker- phone key.

Call the system menu.

Select the menu item and confirm.

Select the menu item and confirm.

Enter and confirm your own multiple subscriber number.

72