Siemens X-400 technical specifications Show Location, Determining the Location of a SCALANCE

Installation and Commissioning

6.10Show Location

Determining the Location of a SCALANCE X-400

To identify a SCALANCE X414-3E locally and with certainty, you can use the "show location" function on a programming device to select the node over the net- work and make it flash. This can be used, for example, when assigning addresses to make sure that the correct node receives the address. All port LEDs of the ad- dressed node flash green at 2 Hz.

With the PST Tool V3.0, you can trigger this function with Module \ Ring.

For more detailed information, refer to the Configuration Manual

SCALANCE X-400, chapter Working with the Primary Setup Tool, section Deter- mining the location of a device.

118	Operating Instructions for SCALANCE X-400 Industrial Ethernet Switches
	C79000-G8976-C186-03