Siemens X-400 technical specifications FM Approval, ATEX Approval, Approvals, Certificates

Approvals, Certificates

!Warning

In hazardous areas, personal injury or damage to property may occur if you make or break an electrical circuit while a SCALANCE X-400 is in operation.

Do not connect or disconnect any live circuits unless risk of explosion can be exc- luded with certainty.

FM Approval

The product complies with the requirements of the standards

●Factory Mutual Approval Standard Class Number 3611

●FM Hazardous (Classified) Location Electrical Equipment: Non Incendive / Class I / Division 2 / Groups A,B,C,D / T4 and Non Incendive / Class I / Zone 2 / Group IIC / T4

ATEX Approval

The product complies with the requirements of the standard

● EN50021

!Warning

Use under Zone 2 (or Div. 2) Ex-protection conditions requires the installation in a housing. The housing has comply with class IP 54 according to standard EN 60529, in the scope of the EU directive 94/9 (Atex 100a).

136	Operating Instructions for SCALANCE X-400 Industrial Ethernet Switches
	C79000-G8976-C186-03