Manuals / Siemens / Computer Equipment / Switch

Siemens X-400 Transmission Rate, Transmission Mode, Transmission Medium, Transmission Range

Models: X-400

1 148

Download 148 pages 53.7 Kb

Page 30

Image 30

System Description of SCALANCE X-400

2.2.51000Base-LX

Transmission Rate

The transmission rate of the optical gigabit ports is 1 Gbps.

Transmission Mode

Transmission with 1000Base-LX is defined in the IEEE 802.3z standard and is specified as 1000 Mbps transmission rate and full duplex.

Transmission Medium

Data is transmitted over single mode FOC. The wavelength is 1310 nm.

The core diameter of the single mode FOC is 9 or 10 µm; the light source is a laser diode. To transmit a signal, only one mode (light beam) is used greatly reducing dispersion. As a result, the maximum range of single mode FOC is greater than that of multimode FOC.

Transmission Range

The maximum transmission range (segment length) is 10 km for single mode FOC.

Connectors

SC duplex female connectors are used.

30	Operating Instructions for SCALANCE X-400 Industrial Ethernet Switches
	C79000-G8976-C186-03

Page 30

Image 30

Siemens X-400 Transmission Rate, Transmission Mode, Transmission Medium, Transmission Range, Connectors

Contents

Preface, Contents Approvals, Certificates Glossary, IndexSIMATIC NET Classification of Safety-Related Notices DangerSafety Instructions Regarding your Product TrademarksC79000-G8976-C186-03 Personnel Qualification Requirements Correct Usage of Hardware ProductsCorrect Usage of Software Products C79000-G8976-C186-03C79000-G8976-C186-03 Preface Purpose of the Operating InstructionsValidity of the Operating Instructions Further Documentation Standards and ApprovalsPreface Installation and Commissioning ContentsIntroduction to Industrial Ethernet Switches System Description of SCALANCEContents Index1.1 Basic Information Industrial Ethernet SwitchesIntroduction to SwitchingThe Need for Industrial Ethernet Switches Introduction to Industrial Ethernet SwitchesTechnical Options network topologies 1.2.1 Ring with Redundancy Manager 1.2 TopologiesIntroduction to Industrial Ethernet Switches Functional DescriptionIntroduction to Industrial Ethernet Switches Electrical RingOptical Ring Figure 1-1 Gigabit ring with redundancy manager RM Configuration ExampleIntroduction to Industrial Ethernet Switches Figure 1-2 Ring with FO cable and redundancy managerFunctional Description Introduction to Industrial Ethernet Switches1.2.2 Star Structure Properties of a Star StructureFigure 1-3 Star structure Electrical Configuration ExampleIntroduction to Industrial Ethernet Switches Figure 1-4 Star structure Optical1.2.3 Line Structure Configuration ExampleIntroduction to Industrial Ethernet Switches Functional Description10/100 Introduction to Industrial Ethernet Switches1.2.4 Redundant Linking of Network Segments Mbit/sIntroduction to Industrial Ethernet Switches The two devices connected in the configuration exchange data frames with each other to synchronize their operating statuses one device is master and the other slave. If there are no problems, only the link from the master to the other network segment is active. If this link fails for example due to a link-down or a device fail- ure, the slave activates its link as long as the problem persists2.1 Properties, Functionality and Features of SCALANCE System Description of SCALANCESystem Description of SCALANCE C-PLUGComponent Components of SCALANCESystem Description of SCALANCE FunctionTransmission Rate 2.2 Ports of SCALANCE2.2.1 10Base-T / 100Base-TX Transmission ModeTransmission range ConnectorsTransmission medium System Description of SCALANCETransmission Mode ConnectorsTransmission Rate Transmission MediumTransmission Mode 2.2.3 100Base-FXTransmission Rate Transmission MediumTransmission Range ConnectorsBFOC connectors are used System Description of SCALANCETransmission Mode ConnectorsTransmission Rate Transmission MediumTransmission Mode ConnectorsTransmission Rate Transmission MediumSystem Description of SCALANCE 2.3 Compatibility of SCALANCECompatibility List End devicesSystem Description of SCALANCE C79000-G8976-C186-03Product Description of SCALANCE 3.1 SCALANCE X414-3E Basic DeviceOverview Product Description of SCALANCE Figure 3-2 Basic device with media modules and coversC79000-G8976-C186-03 Components of the Product Product Description of SCALANCESpares Power ModuleSwitch CPU SlotsSlot Product Description of SCALANCESlot SlotProduct Description of SCALANCE Figure 3-4 Ports of the SCALANCE X414-3ESTBY 3.1.1 Power Module Product Description of SCALANCEChange to the DIL switch during operation Signaling ContactFailure of the power supply Product Description of SCALANCE3.1.2 Digital Inputs DI ModuleProduct Description of SCALANCE 3.1.3 Switch CPU Product Description of SCALANCESerial Port Ethernet PortProduct Description of SCALANCE How It Works 3.1.4 C-PLUG Configuration PlugArea of Application Product Description of SCALANCEDiagnostics Product Description of SCALANCEC-PLUG Startup BehaviorProduct Description of SCALANCE X414-3E StartupSTBY Product Description of SCALANCEFigure 3-10 Ports on the basic device P1 P1 P1 P2 P2 P2 P3 P3 P3 P4 P4 P4Product Description of SCALANCE C79000-G8976-C186-03Procedure Media Modules, Covers, Dummy Cover4.1 Media Modules Available Module TypesOptions for Slot Options for Slots 6 andMedia Modules, Covers, Dummy Cover Properties Connector4.1.1 Fast Ethernet Media Module MM491-2 100Base-FX LED Display of the Fast Ethernet Media ModuleProperties Connector4.1.2 Fast Ethernet Media Module MM491-2LD 100Base-FX LED Display of the Fast Ethernet Media ModuleProperties Connector4.1.3 Gigabit Media Module MM492-2 1000Base-SX LED Display of the Gigabit Media ModuleProperties Connector4.1.4 Gigabit Media Module MM492-2LD 1000Base-LX LED Display of the Gigabit Media ModuleSlots of the Covers 4.2 Covers, Dummy Cover4.2.1 Covers Available Cover TypesMedia Modules, Covers, Dummy Cover CV490Displays of the Cover Figure 4-7 Slot 5 for cover CV490Further Slots for the CV490 2x100 Cover CV490Displays of the Cover Media Modules, Covers, Dummy CoverFurther Slots for the CV490 4x100 Cover CV490Displays of the Cover Media Modules, Covers, Dummy CoverDisplays of the Dummy Cover 4.2.2 Dummy CoverSlot of the Dummy Cover Media Modules, Covers, Dummy CoverMedia Modules, Covers, Dummy Cover C79000-G8976-C186-03Extender Modules 5.1 Twisted Pair Extender EM495-8Eight Additional 100Base-TX Ports Figure 5-2 Twisted pair extender EM495-8 CoversExtender Modules C79000-G8976-C186-03Four Additional Slots for Media Modules 5.2 Media Module Extender EM496-4Connector Extender ModulesCovers Extender ModulesC79000-G8976-C186-03 Extender Modules C79000-G8976-C186-03Extender Modules C79000-G8976-C186-03Installation and Commissioning 6.1 Installing / Removing the SCALANCE X414-3E6.1.1 Installing / Uninstalling with an S7-300 Rail Installing on an S7-300 RailInstallation and Commissioning Installation and Commissioning Removing from the S7-300 rail6.1.2 Installing / Uninstalling with a 35 mm Standard Rail Installation on a 35 mm Standard RailInstallation and Commissioning Installation and Commissioning Figure 6-2 Installation on a 35 mm standard railRemoving from the 35 mm Standard Rail Installing a Media Module 6.2 Installing / Removing the Media Modules, Covers and Dummy Cover6.2.1 Installing / Removing a Media Module Installation and CommissioningInstallation and Commissioning Removing a Media ModuleFitting a Cover Installation and CommissioningVariants of the Covers Removing a CoverFitting a Dummy Cover Installation and Commissioning6.2.3 Fitting / Removing a Dummy Cover Removing a Dummy CoverInstalling the Twisted Pair Extender on the S7-300 Rail 6.3 Installing / Removing Extender Modules6.3.1 Installing / Removing the Twisted Pair Extender Installation and CommissioningInstallation and Commissioning Figure 6-4 Installing the twisted pair extender on the S7-300 railInstallation and Commissioning Removing the Twisted Pair Extender from the S7-300 RailInstalling the Twisted Pair Extender on the 35 mm Standard Rail Installation and CommissioningInstallation and Commissioning Installation and Commissioning Removing the Twisted Pair Extender from the 35 mm Standard Rail6.3.2 Installing / Removing the Media Module Extender Installing the Media Module Extender on the S7-300 RailInstallation and Commissioning Installation and Commissioning Figure 6-6 Installing the media module extender on the S7-300 railInstallation and Commissioning Removing the Media Module Extender from the S7-300 Standard RailInstalling the Media Module Extender on the 35 mm Standard Rail Installation and CommissioningInstallation and Commissioning Installation and Commissioning Removing the Media Module Extender from the 35 mm Standard RailSpecifying the Slot Number 6.4 Slot Numbers of the Modules and CoversInstallation and Commissioning Applying the Slot NumbersInstallation and Commissioning 6.5 Factory DefaultsDIL Switches Further Device PropertiesInstallation and Commissioning 6.6 Ports6.6.1 Power Supply Connectors Polarity Reversal ProtectionFigure 6-10 Pin assignment of connector 6.6.2 Connectors of the Signaling Contact and Grounding StrapInstallation and Commissioning X1 X2Figure 6-11 Pin assignment of connector X1 Inputs 1 through 6.6.3 Digital Input ConnectorsInstallation and Commissioning Polarity Reversal Protection X1Figure 6-12 Pin assignment of connector X1 Inputs 5 through 6.6.4 Digital Input ConnectorsInstallation and Commissioning X1X414-3E Installation and CommissioningThe FastConnect Cabling System A=10mConnecting TP Cord to FC Cable Installation and CommissioningInstallation and Commissioning Figure 6-15 IE FC RJ-45 Modular Outlet Insert 2FEC79000-G8976-C186-03 A1 A1 A1 Installation and CommissioningX414-3EX208 B A2 A2Installation and Commissioning Removing the FC Cable from SCALANCE X414-3E6.6.6 Connectors for Fiber-Optic Cables Installation and CommissioningGigabit Transmission with FOC Installation and Commissioning Fast Ethernet Transfer with FOCFigure 6-19 BFOC plug with fast Ethernet media module MM491-2 Installation and Commissioning 6.7 Operator Controls6.7.1 DIL Switches Figure 6-20 Power module, digital inputs and Switch CPU with controlsStatus Installation and CommissioningSwitch MeaningInstallation and Commissioning Ring Ports in Slots 5 toSwitch2 Possible Settings of the Ring PortsSwitch1 Switch3Defining the fault mask and the LED displays Installation and CommissioningResetting to the factory defaults 6.7.2 SELECT / SET ButtonOverview 6.8 LED DisplayInstallation and Commissioning DisplayLED off Installation and CommissioningLED on LED flashesSTBY 6.8.2 Selecting the Display ModesSTBY STBYSTBY Display Modes A through CIN1/IN5 IN2/IN6IN2/IN6 Display in Display Mode DIN1/IN5 STBYIN2/IN6 LED Display of the Digital Inputs 1 throughIN1/IN5 STBY6.8.5 LED Display - Switch CPU Display Modes A through DIN2/IN6 Port Statuses in DMode AIN1/IN5 STBYIN2/IN6 Port Statuses in DMode BIN1/IN5 STBYIN2/IN6 Port Statuses in DMode CIN1/IN5 STBYIN2/IN6 Port Statuses in DMode DIN1/IN5 STBYRemoving the C-PLUG 6.9 Replacing the C-PLUGInstallation and Commissioning Inserting the C-PLUG in the Slot6.10 Show Location Installation and CommissioningDetermining the Location of a SCALANCE Technical Specifications SCALANCE X414-3EInterfaces Interfaces Technical SpecificationsSwitching Properties C-PlugPermitted Environmental Conditions Technical SpecificationsMTBF information mean time between failure Construction112,4 Technical SpecificationsDimension drawing - SCALANCE X414-3E 109,5Interfaces 7.2 Media Module MM491-2 100Base-FXTechnical Specifications Permitted Cable LengthsInterfaces 7.3 Media Module MM491-2LD 100Base-FXTechnical Specifications Permitted Cable LengthsInterfaces 7.4 Media Module MM492-2 1000Base-SXTechnical Specifications Permitted Cable LengthsInterfaces 7.5 Media Module MM492-2LD 1000Base-LXTechnical Specifications Permitted Cable LengthsInterfaces Extender Module EM495-8Technical Specifications Permitted Cable Lengths107,5 112,4109,5 87,6Interfaces Extender Module EM496-4Technical Specifications Permitted Environmental Conditions112,4 Technical SpecificationsDimension drawing - extender module EM496-4 109,5Approvals, Certificates CE MarkingRequired FDA and IEC labels EMC DirectiveExplosion Protection Directive Approvals, CertificatesNote for the Manufacturers of Machines Installation GuidelinesDirective on Machines Approvals, CertificatesUL Approval Industrial Control Equipment Note for AustraliaUL Approval Information Technology Equipment CSA Approval Information Technology EquipmentcULus Approval Hazardous Location cULus Approval Information Technology EquipmentcULus Approval Industrial Control Equipment Approvals, CertificatesFM Approval ATEX ApprovalApprovals, Certificates Certification Approvals, CertificatesApprovals, Certificates C79000-G8976-C186-03Autocrossover GlossaryAging time AutonegotiationDigital input Fault maskGlossary DispersionMirroring GlossaryMDI-X ModesRing port Signaling ContactGlossary SegmentTELNET GlossaryStore and forward TP PortGlossary C79000-G8976-C186-03Index Standby function SwitchingIndex Status as shippedA&D Technical Support Worldwide, available 24 hours a dayService & Support on the Internet A&D Technical Support