Classification of Safety-Related Notices

!

!

!

This document contains notices which you should observe to ensure your own per- sonal safety, as well as to protect the product and connected equipment. These no- tices are highlighted in the manual by a warning triangle and are marked as follows according to the level of danger:

Danger

indicates that death or severe personal injury will result if proper precautions are not taken.

Warning

indicates that death or severe personal injury can result if proper precautions are not taken.

Caution

with warning triangle indicates that minor personal injury can result if proper precau- tions are not taken.

Caution

without warning triangle indicates that damage to property can result if proper precau- tions are not taken.

Notice

indicates that an undesirable result or status can occur if the relevant notice is ig- nored.

Note

highlights important information on the product, using the product, or part of the docu- mentation that is of particular importance and that will be of benefit to the user.

© Copyright Siemens AG, 1998 to 2005 - All rights reserved

The reproduction, transmission or use of this document or its contents is not permitted without express written authority. Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved.

Siemens AG

Automation and Drives

Industrial Communication

Postfach 4848, D-90327 Nürnberg

Disclaimer

We have checked the contents of this manual for agreement with the hardware and software described. Since deviations cannot be precluded entirely, we cannot guarantee full agreement. However, the data in this manual are reviewed regularly and any necessary corrections included in subsequent editions. Suggestions for improvement are welcome.

C79000-G8976-C186-03

Technical data subject to change.

Siemens Aktiengesellschaft

Printed in the Federal Republic of Germany

2

Page 2
Image 2
Siemens X-400 Classification of Safety-Related Notices, Copyright Siemens AG, 1998 to 2005 All rights reserved