Siemens X-400 Removing the FC Cable from Scalance X414-3E, Releasing the FastConnect RJ-45 plug

Installation and Commissioning

Removing the FC Cable from SCALANCE X414-3E

Under some circumstances, a screwdriver is necessary to remove the twisted pair cables with RJ-45 plugs because it may not be possible to reach the connector with your hand due to neighboring media modules, covers, or the dummy cover. If this is the situation, do the following:

1.Press the catch on the RJ-45 plug to the left with a small screwdriver.

2.Remove the cable.

Figure 6-17 Releasing the FastConnect RJ-45 plug

98	Operating Instructions for SCALANCE X-400 Industrial Ethernet Switches
	C79000-G8976-C186-03