To switch between the album list and JPEG image file list

1Press < while the “Photo Album” list is displayed.

2Select “Display Mode” using M/m, and press ENTER.

3Select “File” or “Album” using M/m, and press ENTER.

zHints

•You can switch the thumbnail picture on the album list among the JPEG image files in the selected album by pressing m/M.

•You can switch to the previous or next album by pressing m/M on the JPEG image file list.

To turn off the “Photo Album” list

Press SYSTEM MENU.

To display the detailed information

1Select a JPEG image file, and press ,.

2Select “Detailed Information,” and press

ENTER.

The detailed information for the selected JPEG image file appears.

To reload the files or folders

When a disc or the connected USB device contains 1,000 or more files and/or 100 or more folders, select “Read next” in the “Photo Album” list, and press ENTER to view unloaded files or folders.

It may take a few minutes to load files or folders.

bNotes

•The thumbnail for a file that cannot be playable on the recorder is displayed as “.”

•While using the “Photo Album” menu, “HDD” on the front panel lights up even when you play JPEG image files on a disc or the USB device.

Playing a slideshow

1 Follow steps 1 to 4 of “Using the “Photo Album” List.”

The “Photo Album” list appears. Switch between the album list and JPEG image file list, if necessary.

2 Select an album or JPEG image file using M/m, and press H.

The slideshow starts.

zHint

You can start a slideshow by selecting “Start Slideshow” from the sub-menu.

bNotes

•Depending on the aspect ratio, some pictures may be displayed with black bands at top and bottom, or left and right.

•Large picture files may take a few seconds to display. This is not a malfunction.

To stop a slideshow

Press x (stop) or O RETURN.

To pause a slideshow

Press X (pause).

To view the previous/next image during a slideshow

Press ./>.

To zoom an image

Press ENTER repeatedly during a slideshow.

Each time you press ENTER, the magnification changes as shown below. 2× t 4× t normal magnification You can move the area you want to zoom using </M/m/,. (RDR-AT100/AT200 only) You can also zoom an image using ZOOM.

To rotate an image

Press ANGLE repeatedly during a slideshow.

Each time you press ANGLE, the image turns clockwise by 90°.

Album Photo

,continued 107