Sony Audio Input Settings (Audio In), LINE 1 In, Tuner Level, NICAM Select, NTSC on PAL TV, External Audio

LINE 1 In

Selects a method of inputting video signals for the LINE 1/DECODER jack. The picture will not be clear if this setting does not match the type of video input signal.

Video	Inputs video signals.
S-Video	Inputs S-video signals.
RGB	Inputs RGB signals.
Decoder	Select this when
	connecting to an external
	decoder (PAY-TV/Canal
	Plus analogue decoder). If
	you connect to a cable box/
	satellite receiver such as
	CanalSat, do not select this
	option.

NTSC on PAL TV

Sets the recorder to convert signals of the NTSC colour system to the PAL colour system to play NTSC discs on PAL-only TVs. Refer to the operating instructions supplied with your TV.

On	Plays NTSC discs on PAL-
	only TVs.
Off	Select this if the connected
	TV is a multi-system
	(NTSC-compatible) TV.

Audio Input Settings (Audio In)

You can adjust the sound according to the playback and connection conditions.

NICAM Select

For details on NICAM system, see page 57.

NICAM	Normally select this
	position.
Standard	Select this if the sound
	from NICAM broadcasts is
	not clear.

Tuner Level

If the playback sound is distorted, set this item to “Compression.” The recorder reduces the audio output level.

This function affects the output of the following jacks:

–LINE 2 OUT R-AUDIO-L jacks

–LINE 3 – TV jack

–LINE 1/DECODER jack

Normal	Normally select this
	position.
Compression	Select this when the
	playback sound from the
	speakers is distorted.

External Audio

Stereo	Select this when
	receiving stereo
	programmes from
	connected equipment.
Bilingual	Select this when
	receiving bilingual
	programmes from
	connected equipment.

Adjustments and Settings

,continued 123