2.Recording a Programme
HDD +RW
This section introduces the basic operation to record a current TV programme to the hard disk (HDD) or to a disc (DVD). For an explanation of how to make timer recordings, see page 52 (for
HDD 
DVD
PROG +/–
| X |
z REC | REC MODE |
x REC |
|
STOP |
|
1 Press HDD or DVD.
If you want to record to a DVD, insert a recordable DVD.
2 Press PROG +/– to select the programme position or input source you want to record.
3 Press REC MODE repeatedly to select the recording mode.
Each time you press the button, the display on the TV screen changes as follows:
*Available when “Manual Rec. Mode” is set to “On (go to setup)” in the “Recording” setup (page 127).
For more details about the recording mode, see page 147.
4 Press z REC.
Recording starts.
To stop recording
Press x REC STOP.
To pause recording
Press X.
To resume recording, press X again.
To watch another TV programme while recording
If your TV is connected to the T LINE 3 – TV jack, set your TV to the TV input using the TV/DVD button and select the programme you want to watch. If your TV is connected to the LINE 2 OUT or COMPONENT VIDEO OUT jacks, set the TV to TV input using the TV t button (page 23).
TV Direct Rec. (for SMARTLINK connections only)
When the TV is turned on and the recorder is turned off, press TV PAUSE. The recorder automatically turns on and starts recording what you are watching on the TV to the HDD.
Set “TV Pause” to “TV’s Tuner” in the “Options 2” setup (page 133).
Recorder DVD Your Know to Getting — Operations Basic Seven
,continued 35