4 Select “Title Name” using M/m, and press ENTER.
The display for entering characters appears.
The current name is displayed at the input row.
Input row
5 Move the cursor to the point where you want to insert the character using m/M.
To erase all of the characters, press and hold CLEAR for 2 seconds or more.
6 Select “Upper case” or “Lower case” using ./>.
The characters for the selected type are displayed.
7 Press </M/m/, to select the character you want to enter, and press ENTER.
The selected character appears at the input row.
To insert a space, press X (or select “Space,” and press ENTER).
8 Repeat steps 6 and 7 to enter the remaining characters.
To erase a character, move the cursor to the character at the input row, and press CLEAR (or select “Clear,” and press ENTER).
To insert a character, move the cursor to the right of the point where you want to insert the character. Then select the character, and press ENTER.
To erase all of the characters, press and hold CLEAR for 2 seconds or more.
9 Press x (or select “OK,” and press
ENTER).
To cancel the setting, press
ORETURN.
You can execute options effective for the entire disc in the “Disc Setup” setup.
SYSTEM
MENU
</M/m/,,
ENTER
Labelling a disc+RW |
1 Insert a disc.
See “1. Inserting a Disc” on page 34.
2 Press SYSTEM MENU.
The System Menu appears.
3 Select “Disc Setup,” and press
ENTER.
Recorder DVD Your Know to Getting — Operations Basic Seven
,continued 41