Preparing for HDD camcorder dubbing

Connect an HDD camcorder to the USB jack on the recorder.

Refer as well to the instruction manual supplied with the HDD camcorder before connecting.

1 Turn on your HDD camcorder and the recorder.

2 Connect your HDD camcorder to the USB jack on the front panel.

DVD recorder

to USB jack

USB cable (not supplied)

USB output

HDD camcorder

: Signal flow

3 Set your HDD camcorder to the USB connection mode (example:

COMPUTER” or “ USB CONNECT”).

For details, refer to the operating instructions supplied with the HDD camcorder.

To restart the connected USB device

Select “Restart USB Device” of “USB” in the “Options 2” setup (page 133).

bNotes

Connect the HDD camcorder directly to the recorder.

Do not disconnect the USB cable while dubbing.

When signal input to the USB jack (type A) on the front panel or recorder operation cannot be performed correctly when using an HDD camcorder, connect the HDD camcorder to the LINE IN jack and follow the instructions of “Recording from Connected Equipment” on page 63.

The recorder can recognise and store the shooting date and time information of up to 10 HDD camcorders. If you connect 11 or more HDD camcorders, one-touch dubbing and “Incremental Dubbing” cannot be made properly.

88